| 翻訳と辞書 |
.45 GAP
The .45 G.A.P. (often called the .45 "GAP") pistol cartridge was designed by Ernest Durham, an engineer with CCI/Speer, at the request of firearms manufacturer Glock to provide a cartridge that would equal the power of the .45 ACP, have a stronger case head to reduce the possibility of case neck blowouts, and shorter to fit in a more compact handgun. G.A.P. is an initialism for "Glock Automatic Pistol", and the .45 G.A.P. is the first commercially introduced cartridge identified with Glock.
==Development==
The .45 GAP has the same diameter as the .45 ACP pistol cartridge but is slightly shorter, and uses a small-pistol primer instead of the large-pistol primer most commonly used in .45 ACP ammunition. Originally, the maximum bullet weight of the .45 GAP was . In order to provide terminal ballistics that matched the standard .45 ACP loads, the .45 GAP was designed to operate at a higher standard pressure—roughly equivalent to the higher pressures found in .45 ACP "+P" rounds. Since the .45 GAP has a much smaller cartridge volume than the .45 ACP, the desired pressure and resulting velocity needed to be achieved through powder selection alone. Later development concluded that the .45 GAP could also fire ammunition as does the .45 ACP.
抄文引用元・出典: フリー百科事典『 ウィキペディア（Wikipedia）』
■ウィキペディアで「.45 GAP」の詳細全文を読む
スポンサード リンク
| 翻訳と辞書 : 翻訳のためのインターネットリソース |
Copyright(C) kotoba.ne.jp 1997-2016. All Rights Reserved.
|
|